Talalay latex
Springy and responsive. It pushes back instead of sinking, sleeps cooler than memory foam, and holds its shape for years.
- Thickness
- 2" or 3"
- Firmness
- 24 ILD or 28 ILD
- Feel
- Buoyant, quick recovery
- Best for
- Hot sleepers, combo sleepers
Cut to order / Any dimension
Mattress toppers cut to your size
Gel memory foam, talalay latex, and poly foam cut to any width, length, and thickness you send us. If your bed is not a standard size, that is the whole reason we are here.
- 01Any size up to 80" x 84"
- 02Quote in 1 to 2 business days
- 03Covered or bare foam
- 045 year warranty
Get a quote
No obligation
No minimum
One piece is a normal order here
Half inch increments
Cut to your exact numbers, not rounded up
Cover optional
Zippered stretch-knit cover, or bare foam
Free shipping
Rolled and boxed to the lower 48
Materials
Three foams, cut the same way
Latex, memory foam, and poly foam solve different problems. Both are cut to the dimensions you send. If you are not sure which one fits how you sleep, say so in the form and we will walk you through it.
Gel memory foam
Contours to your shoulders and hips and stays put. The gel infusion pulls heat away from the surface so it does not run as warm as older memory foam.
- Thickness
- 2", 3", or 4"
- Density
- 3 lb or 4 lb
- Feel
- Slow sink, pressure relief
- Best for
- Side sleepers, sore hips and shoulders
High density base foam
For beds that are too soft or too thin to fix with comfort foam alone. Add it under a latex or memory foam layer to rebuild support instead of just adding cushion.
- Thickness
- 1" to 4"
- Density
- 1.8 lb HD
- Feel
- Firm, supportive
- Best for
- Sagging RV and sofa bed mattresses
Sizes
Custom topper sizes we cut most
These are the sizes people ask for when the standard twin through king lineup does not fit. If your bed is not on this list, that is fine. Measure it and send the numbers.
| Size name | Dimensions | Where it shows up |
|---|---|---|
| RV short queen | 60 x 74 or 60 x 75 | Travel trailers, fifth wheels |
| RV king | 72 x 80 | Class A motorhomes |
| RV short king | 72 x 75 | Fifth wheels |
| RV bunk | 28 x 75, 30 x 75, 34 x 75 | Bunkhouse trailers |
| Olympic queen | 66 x 80 | Wider-than-queen frames |
| California queen | 60 x 84 | Extra-long queen frames |
| Three quarter | 48 x 75 | Antique and vintage beds |
| Antique full | 52 x 74 and similar | Pre-1950 bed frames |
| Sofa bed queen | 60 x 72 | Sleeper sofas, futons |
| Sofa bed full | 54 x 72 | Sleeper sofas |
| Truck sleeper | 35 x 79, 42 x 80 | Semi cab bunks |
| Split king half | 38 x 80 each side | Adjustable bases |
| Daybed and trundle | 39 x 75 | Guest rooms, dorms |
| Antique three quarter long | 48 x 80 | Restored iron and wood frames |
Sizes vary between manufacturers and model years, so measure your own mattress rather than trusting the name on the spec sheet. We cut to the numbers you send, in half inch increments.
Measuring
Three numbers get you a quote
Width, length, thickness. Take two minutes with a tape measure and we can price your topper exactly.
-
Measure the mattress, not the frame
Pull the sheets off and run the tape along the top surface of the mattress at its widest and longest points. Frames are usually a little larger than what sits inside them.
-
Round to the nearest half inch
We cut in half inch increments. If your mattress reads 59 and three quarters, send 60. A topper slightly under the mattress size sits better than one slightly over.
-
Pick your thickness
2" softens a firm bed. 3" is the common choice for a bed that has gone flat. 4" is for a mattress you are trying to rescue. Check your headboard and side rails before going thick.
-
Tell us what it is going on
RV, sofa bed, antique frame, adjustable base. Knowing the bed helps us flag anything that will not work before you spend money on it.
Who orders these
Beds that were never going to fit off the shelf
Short queens, bunks, and short kings
RV mattresses are thin, firm, and rarely a standard size. A custom RV mattress topper cut to your short queen or bunk dimensions is the difference between sleeping on the road and dreading it.
Three quarter and vintage bed sizes
A 48 x 75 three quarter bed or a pre-war full will not take a modern topper. We cut to the mattress you actually have so the antique frame keeps its proportions.
Sleeper sofas and Murphy beds
Pull-out mattresses are thin by design and you can feel the bar through them. A 2" or 3" topper cut to the shorter 72" length folds back into the frame instead of bunching.
Split king and adjustable bases
Cut as two independent halves so each side still articulates. Latex is the better pick here since it bends without cracking at the hinge.
Truck sleepers and cab bunks
Semi cab bunks run to their own dimensions, usually somewhere between 35 x 79 and 42 x 80. Send the numbers off your bunk and we will cut to them.
Daybeds, trundles, and loft beds
Daybeds, trundles, dorm lofts, and built-ins all end up somewhere between standard sizes. Any dimension in half inch increments is a normal order.
Process
From measurement to doorstep
Step 01
Send measurements
Width, length, thickness, and what bed it is going on. That is everything we need to price it.
Step 02
Get a written quote
Price, foam options, and lead time by email within 1 to 2 business days. No deposit to see it.
Step 03
We cut and sew
Your piece is cut to spec and, if you added one, fitted with a zippered stretch-knit cover.
Step 04
Rolled and shipped
Compressed, boxed, and shipped free to the lower 48. It expands within a day of unrolling.
Questions
Before you send your measurements
What sizes can you actually cut?
Anything from a bunk up to 80" x 84", in half inch increments, at 1" to 4" thick. Custom sizing itself is not an upcharge, you pay for the material and the labor either way.
How much does a custom mattress topper cost?
It depends on square footage, material, and thickness, so we price each one rather than posting a table that would be wrong for most people. You get the number in writing before anything is cut.
Do you cut rounded corners or odd shapes?
No. We cut rectangles to your exact dimensions, which is what the large majority of custom orders need. If your mattress has rounded corners, order to the full width and length. The small overhang at each corner tucks in under the sheets and is not something you feel.
Can I just buy a standard topper and cut it myself?
You can cut foam with an electric knife, but the edge will not be square and latex in particular tears rather than slices cleanly. A cut piece also will not fit a cover, and cutting it voids most warranties. Ours are cut to your spec and keep the full warranty.
Talalay latex or memory foam?
Latex if you sleep hot, change positions during the night, or want the topper to push back. Our Talalay comes in 24 ILD for a softer surface and 28 ILD for a medium feel.
Memory foam if you sleep on your side and want your shoulder and hip to sink in. If you are between the two, tell us how you sleep in the form and we will make a recommendation.
Do I need a cover?
Not required, but recommended. Bare foam grabs at sheets and picks up body oils. A zippered stretch-knit cover keeps the topper in place, comes off to wash, and adds years to it. You can add one to any size.
How long does it take?
Quotes go out within 1 to 2 business days. Once approved, most custom pieces ship within a week.
Is a custom topper returnable?
Because each piece is cut to your dimensions, custom orders are not returnable for size. That is why we quote in writing and confirm every measurement with you before cutting. Manufacturing defects are covered by the 5 year warranty.
Will it work on an adjustable base?
Yes. For a split configuration we cut two independent halves. Latex flexes best at the hinge points, so it is our usual recommendation for adjustable bases.
Ready when you are
Send us three numbers
Width, length, thickness. We will come back with a price, the foam options that make sense for your bed, and how long it takes.
Get my quote